The average cost of installing a vinyl fence ranges from $36 to $65 per linear foot, although the fence design and height could drive the cost higher or lower.
This means you can expect to pay between $5,400 and $9,750 for a 150-foot vinyl fence. Additional factors that can influence the final cost include the fence’s height, permit fees, and any yard prep, like removing old fencing or uneven ground.
This guide gathers data from small and big cities across the U.S., so you can get a more accurate estimate of how much your project will cost.
Cost by Location
The cost of a vinyl fence depends on your location. Fencing contractors in major metropolitan areas will typically charge more per linear foot for installation than those in rural regions. Additionally, in remote places, certain vinyl styles might be hard to find or need to be shipped, which increases costs.
The table below shows the typical cost range for installing a vinyl fence in various cities across the U.S.
City | Average Cost Per Linear Foot (Including Labor and Material) |
Northeast U.S. | |
Pawtucket, RI | $35 – $65 |
New York, NY | $43 – $70 |
Southeast U.S. | |
Dothan, AL | $32 – $62 |
Orlando, FL | $32 – $63 |
Atlanta, GA | $37 – $63 |
Midwest U.S. | |
South Bend, IN | $33 – $66 |
Chicago, IL | $38 – $68 |
Northwest U.S. | |
Corvallis, OR | $33 – $64 |
Seattle, WA | $37 – $68 |
Southwest U.S. | |
Roswell, NM | $33 – $63 |
San Diego, CA | $36 – $66 |
Houston, TX | $38 – $62 |
Cost by Fence Length

Most contractors charge for vinyl fence installation by linear foot, so the size of your fence decides the overall cost. To figure out the approximate price of your project, multiply the number of linear feet you need by the national average range of $36 to $65 per linear foot.
Check the table below for sample costs of common fence lengths based on the average rate:
Fence Length (In Linear Feet) | Average Cost (Materials and Labor) |
50 | $1,800 – $3,250 |
100 | $3,600 – $6,500 |
150 | $5,400 – $9,750 |
200 | $7,200 – $13,000 |
300 | $10,800 – $19,500 |
400 | $14,400 – $26,000 |
500 | $18,000 – $32,500 |
Keep in mind that some contractors may not charge by the linear foot but by the hour or by the number of preassembled fence panels you need.
Cost by Fence Design
Whatever you want your fence to look like, you should be able to find a long-lasting, low-maintenance option in vinyl. Here are the typical price ranges for the most popular vinyl fence styles
Fence style | Cost Per Linear Foot (Including Labor and Material) |
Split-rail vinyl fence | $14 to $25 |
Picket vinyl fence | $18 to $30 |
Privacy vinyl fence | $26 to $61 |
Shadowbox vinyl fence | $29 to $55 |
For more information, check out this pricing guide:
Cost of Labor
The labor cost for installing a vinyl fence typically ranges from $5 to $13 per linear foot or $30 to $55 per hour, depending on the complexity of the installation and local labor rates.
Factors like digging post holes, setting posts in concrete, and working around obstacles can increase labor time and the overall costs.
DIY Cost vs. Pro Cost
Assuming you have to buy all-new equipment and fencing materials for this project, you would spend about $3,873 on tools and materials to build a 150-linear-foot vinyl fence DIY. In addition to the money, you should expect to invest two days into building your fence.
Installing the fence DIY might save you money, but it requires time, effort, and precision. Hiring a professional ensures the job is done correctly the first time, reducing the risk of installation mistakes that could lead to expensive repairs later.
If you tackled the vinyl fence installation yourself and the result wasn’t what you expect, check our fence repairing cost guides:
Other Factors that Affect Cost
Cost by Color
Vinyl fencing comes in different colors without you having to paint it (unless you want to). The most common colors of vinyl fencing are solid white, solid black, gray, and wood-grain styles meant to replicate real wood.
White and gray are the least expensive while a black vinyl fence can cost up to $65 per linear foot.
You can usually find all the different styles of vinyl fences in various colors and finishes, so there is a lot of mixing and matching you can do when deciding the look you want for your fence.
Cost by Height
In most cases, a fence for the backyard will be 6 feet tall. Some vinyl fences come in 8-foot or 4-foot panels, too, so you can choose the right height for your needs.
- If you want an 8-foot fence, you can expect your budget to increase by 25% – 35%.
- For a 4-foot fence, expect a decrease of 25% – 35%.
That price difference is simply the result of larger vinyl panels costing more and smaller vinyl panels costing less.
Remember: Check with your homeowners association or local municipality to find out if your neighborhood has any rules about fence height.
Cost to Install Gates
When you add gates to your vinyl fence, you also add extra costs. Because fence gates require hardware and more labor to install, gates cost significantly more than regular fence panels.
You can expect to pay anywhere from $237 to $1,200 for a manual single gate. Cost will be higher for driveway, double, and automatic gates. Estimating exactly how much a gate will add to your project’s overall budget can be difficult, since gates come in all different shapes and sizes.
Cost to Install Fence on Sloped Land
Installing a vinyl fence on an incline will take more work and therefore cost more than installing one on flat ground. Depending on the steepness of your property’s hill and the positioning of the fence, your contractor may need to regrade the land to install your fence properly.
The way slope affects overall cost works on a case-by-case basis. However, most homeowners in the U.S. pay between 80 cents and $2 per square foot for regrading.
Cost of Permits for Fencing
Permits can add anywhere from $20 to $150 to the overall cost of your project, depending on factors such as what kind of permits you need and the size of your fence.
Where you live may or may not require you to get a building permit to put up a fence around your yard. If you plan on hiring a contractor to install your fence, that pro will usually know what permits you need locally and will obtain them for you. Otherwise, you’ll need to contact the building regulators in your city or county.
Cost of Old Fence Removal
If your new vinyl fence will replace an existing fence, your contractor can probably remove the old one for you. Expect to pay around $3 to $5 per linear foot of fence removed.
The final price tag will vary depending on the type of fence, how much of it there is to remove, and whether or not the surrounding terrain makes it difficult to dig.
Cost of Painting a Vinyl Fence
Even though vinyl fences already come in different colors, you may want to further customize your fence with a color of your choice. The average cost to paint a vinyl fence is $3.25 to $10 per linear foot of fencing.
FAQ About Vinyl Fencing
Upfront, installing a vinyl fence costs more than wood. However, vinyl fences don’t need the regular maintenance (painting, staining, sealing, etc.) of wood fences, so you may actually save money in the long run by going with vinyl.
PVC (polyvinyl chloride) is an affordable type of vinyl. Most vinyl fences are made of PVC.
With proper cleaning and barring any accidents, a vinyl fence can last several decades. Vinyl fences aren’t vulnerable to water damage, pests, or rot, but some can topple in high winds because the solid panels don’t leave space for air to move through.
Invest in a Durable Vinyl Fence
You will pay more for vinyl fencing, but that higher cost comes with more convenience and durability. Vinyl fences require little maintenance, they’re easy and quick to install, and they can last a lifetime.
Ready to transform your backyard with a new vinyl fence? Home Gnome delivers the best home service experience at the click of a button. Book reliable fencing services and leave the rest to us.
Read More:
Main Image Credit: Victor / Adobe Stock Free / License